Saturday, July 8, 2017

Exactly what is Dri-Wash 'n Guard?

DRI WASH N GUARD. is a combination car wash, polish and protective glaze which is applied directly to a dirty surface without the use of water, it contains no waxes, nor is it simply a polish.

Waxes do a good job of "protecting" but often leave the paint dull. Polishes are great at removing minor stains and blemishes, and are much more capable of rejuvenating dull paint. But polishes often are abrasive, and provide very little protection on the paint surface. Paint sealants protect very well, but cannot clean or polish. A vehicle's paint must be virtually pristine before the sealants can be applied. DRI WASH 'n GUARD. combines the best features of waxes, polishes and paint sealants without any of the drawbacks.

How is it possible to apply DRI WASH 'n GUARD. over a dirty surface?

DRI WASH 'n GUARD. contains 47 ingredients, including wetting agents, lubricants and protectants which have never been used by the car care industry.
The detergents and wetting agents in DRI WASH 'n GUARD. combine to soften and emulsify surface grime, while a specific blend of polymeroxane fluids and hydrophenolic lubricants attach a microscopic layer of exclusive PolyGuard-3. to the surface. PolyGuard-3. is an extremely rare (and expensive) substance which provides a bonded layer of protection against any remaining abrasive not broken down by the detergents and wetting agents.

How do I care for my vehicle between DRI WASH 'n GUARD. applications?
It's EASY, All you need is two soft terry towels-a small washcloth and a hand towel. Wet the smaller one with water until it is almost dripping, then lightly run over the area to be cleaned (such as the hood). DO NOT RUB HARD. The dirt and water will not stick to the DRI WASH 'n GUARD. on the surface. Now take the dry, larger towel and lightly buff the area dry. That exclusive DRI WASH 'n GUARD. shine will come right back. Ordinarily, one wetting of a small washcloth is enough to finish an entire car.

A little common sense will help here-if your car is really dirty with caked mud, pebbles, etc. remove it from the surface with care.

How durable is DRI WASH 'n GUARD.?

A vehicle surface protected by DRI WASH 'n GUARD. will bead water for a year or more, even on windshields which are scrubbed by wiper blades, ice scrapers, etc. When applied to paint on a new vehicle, then reapplied twice a year, the paint will not fade. Once oxidation begins, however, it cannot be stopped, only slowed. On older, extremely oxidized paint, DRI WASH 'n GUARD. may need to be applied as often as every 2-3 months, even though the paint is still protected and beading water. DRI WASH 'n GUARD. helps protect against the effects of high sun exposure, acid rain and road salt.

4 comments:

  1. I see it as a brilliant technique for removing all stains,scratches and dust from our cars and above all it is convenient to use for glass and mirrors as well, I am surely going to use this to make my car look brand new as it was, thankyou for introducing this new technology in car worlds.

    ReplyDelete
  2. This is extremely informatics, new and clear. I feel that everything has been depicted in systematic route
    with the objective that peruser could get most extraordinary information and understand various
    things.Thanks for the marvelous posting! I seriously enjoyed reading it, you can be a great author.I will
    make sure to bookmark your blog and will come back later on.
    Regards
    best essay writing service

    ReplyDelete
  3. I wanna thanks to a great extent for providing such informative and qualitative material therefore often
    domino 99.

    ReplyDelete
  4. Modern times when internet has so much facility of gossip and stuff, your articles have awfully refreshed me.
    reviews

    ReplyDelete